Nash Everett: The #1 in Bradley Beach, NJ for Mold Testing & Inspection

While it’s often thought that crawl space encapsulation is bad for the home, that’s not always the case. In fact, it’s a good idea for many reasons, including preventing pests and improving energy efficiency. This is especially important if you live in a humid climate, where the earth around your home naturally contains more moisture than the rest of your house. This higher humidity makes it easier for mold to grow, and could also damage your ductwork.

There are a few steps to follow before getting a crawl space encapsulation. First, you must obtain a permit. Permits can be expensive, so you need to ensure that you have the money to cover all necessary expenses. Most communities require a crawl space encapsulation permit, which can range anywhere from $100 to $250. Then, once the contractor has completed the project, an inspector will check the work and record it on your property details.

A proper water drainage system should be in place. A sump pump or French drain system can help direct water away from the home. Fiberglass is not an appropriate insulator for crawl spaces, as it absorbs moisture and loses its R-value as it stands in contact with water. In addition, fiberglass can sag under the weight of water and can open holes in your encapsulation blanket. So, it’s recommended to hire a professional crawl space encapsulation contractor.

Before installing a vapor barrier, you should fix any water intrusion issues. If you don’t have a sump pump, you should consider contacting New Jersey Basement Authority for a perimeter drainage system and a sump pump. A sump pump or perimeter drainage system is important because water can enter the crawl space through foundation walls and the ground. A vapor barrier will reduce moisture and prevent mold and pest interest from growing.

Once you’ve installed a vapor barrier, you’ll need to install the plastic lining. The vapor barrier is a durable material that keeps moisture from penetrating your home. Depending on your budget, this vapor barrier can cost anywhere from $0.50 per square foot to about $180. The vapor barrier costs around $50 for a four-inch-by-180-foot roll. Make sure the vapor barrier is secured properly by sealing any gaps or vents. Besides sealing vents, you should also seal any gaps or holes in your crawl space. Installing vent covers will cost anywhere from $15 to $22.

Once you’ve cleaned up the dirt and vapor barrier, you can begin the process of encapsulating your crawl space. A professional crawl space encapsulation can cost anywhere from $5,000 to $15,000, and the cost depends on the size of the crawl space and its condition. A dirty crawl space is more expensive to clean, and encapsulation will take more time than an otherwise clean one. Also, if you’ve had structural repairs or waterproofing done in the crawl space, you can expect to pay more.

The benefits of crawl space encapsulation are multiple. First, it insulates the area underneath your home, preventing extreme temperatures. Second, it helps maintain your home’s value. Encapsulation makes it easier to sell your house when the time comes. Encapsulation also prevents mold and mildew from developing, and prevents the warping of floors and foundation walls caused by moisture. This encapsulation procedure increases your home’s overall value, which is important for home sales.

Finally, a properly encapsulated crawl space should be odor-free. Odors arising from the crawl space may include mildew and mold. However, chemical or bleach smells are often the result of poorly-made materials. You may want to contact a professional for a free quote. If you have any questions, contact an experienced crawl space encapsulation specialist and ask for a free estimate.

Another benefit of crawl space encapsulation is that it seals off the crawl space from both outdoor air and critters. This prevents critters from accessing the area, thereby preventing them from spreading disease and eating home structural elements. And finally, encapsulation will also keep your home more comfortable in the winter, reducing your energy costs. The advantages of crawl space encapsulation include preventing mold and mildew growth and saving energy.

In addition to sealing off the crawl space, this method helps eliminate mold and moisture problems and can be expensive. Crawl space encapsulation can cost as much as $1,100. A pedestal sump pump costs $60-$170 and a submersible model can cost anywhere from $100 to $400. Make sure to purchase a powerful sump pump, which should be able to handle heavy rainfall. It’s also important to ensure that the pump is in an airtight bucket so that it doesn’t pool or evaporate back into the crawl space.